Products

Electronic Load Controller (ELC)

Geyser Timer Controller

  • The ELC is a battery backed up 5 user program selectable timer controller that will reduce your energy consumption of stand-alone electric geysers and solar/electric geyser combinations.
  • The ELC runs off a very accurate real time clock and will maintain its setting for 8 years regardless of being powered up by mains power or not.
  • A random delay for the geyser start up after a power outage allowing power to stabilize minimizing possible electrical damage.(this can be overridden by the user)
  • This same delay to ensure not all loads are returned to the power grid at the same time. (this can be overridden by the user)
Intelligent Air Conditioner Controller (IAC)

Motion sensing for air conditioners

  • The Smart Energy IAC will reduce your energy consumption and positively impact your bottom line.
  • This easy to install unit could fund you air conditioner maintenance contract and replace them at their end of life.
  • This unique South African patented and SABS approved product has been tested by Pretoria University in conjunction with Eskom showing a massive energy reduction. With a 20 000 installation base and under 10 failures shows its reliability for its intended application.
  • The IAC does for air conditioners what motion sensing control does for lighting except the results are many times more flattering. It will ensure that the air conditioner is off in an unoccupied area.
Timed Motion Monitor (TMM)

Motion sensing for lighting(TMM)

  • The TMM will control your lighting thereby reducing your energy consumed.
  • This South African designed and manufactured TMM is well suited to residential and commercial environments. In many cases lighting is most prevalent loads in buildings.
  • The TMM makes use of switching techniques that can withstand large numbers of lights and large switch on and switch off spikes making it ideal for all indoor lighting circuits and extremely reliable.
  • This unit has been designed to work with large LED, Florescent and incandescent loads.
  • The unit has a time adjustment for turn off since the last motion was detected.
  • It also has an ambient light adjustment at which you want the light to come on once motion is detected (the lowest lighting level for it not to switch on is 100 lux).
Intelligent Switch Unit (ISU)

Flick Switch (with or without pre programmed time out)

  • Flick switch units  offer various load limiting options where multiple loads are controlled from the same switch and can include pre-programmed time outs.
  • Extra loads with the ISU attached can be turned on by flicking the switch from on to off and on again in under 2 seconds (fast).
  • These same loads can be turned off by flicking the switch from on to off and on again in over 2 seconds (slow).
  • An additional program can be added for products that need to stay on for a pre- determined time and then switch off. Flicking the switch again initiates the timeout.
Appliance Protector

Appliance Protector

  • Load shedding causes electrical stress on most electrical appliances when power is restored.
  • Power surges and spikes are a further stress factor on our overstretched power grid.
  • Most failures occur on appliances that return to power automatically without delay.
  • The appliance protector delays this start-up by 30 seconds and protects against surges and spikes.
  • The Appliance protector is designed to plug in between the appliance power plug and the wall mains socket.
  • This unit ensures that fridges, washing machines, dish washers, tumble dryers, garage door motors, TVs etc only come back on line when the power is stable.
  • It also protects these appliances during normal operation from surges and spikes on the unstable Eskom power grid.